Home » Electrical Safety (Page 5)
Category Archives: Electrical Safety
7 January 2018 Principal Speaking at Seminar BS 7671:2018 18th Edition of the IET Wiring Regulations Interpreted by the experts
Hear about key changes being introduced in 18th Edition, from key committee experts. BS 7671:2018 Requirements for Electrical Installations should be used for new designs from 1 January 2019. If you’ve been wondering what has changed and what you might need to do differently, attending this update seminar just four days later will give you […]
Earth fault loop impedance revision of ENA Engineering Recommendation P23
Graham’s article in the latest IET Wiring Matters explores earth fault loop impedance values for supplies up to 100 A, following the update of ENA Engineering Recommendation P23 in 2018. The article can be viewed here. G Kenyon Technology Ltd are not responsible for the contents of other web-sites linked from this page.
IET Guidance updated to 18th Edition now available to order
The suite of Guidance Notes to support the recently published BS 7671:2018 Requirements for electrical installations (IET Wiring Regulations 18th Edition) is now available to order from the IET on their web-site. Guidance Note 3 is already available, along with the On-Site Guide. Included in this, are the following publications, for which our Managing Director […]
Pre-order NOW: IET Code of Practice for Electric Vehicle Charging Equipment Installation – 3rd Edition
Now available to Pre-order, the IET Code of Practice for Electric Vehicle Charging Equipment Installation – 3rd Edition This new Edition, for which our Managing Director and Principal, Graham Kenyon, is the lead author, has been completely revised and updated in-line with the 18th Edition of the IET Wiring Regulations (BS 7671:2018 Requirements for electrical […]
RCD protection for socket-outlets in the 18th Edition (BS 7671:2018)
Image from IET web-site The publication of the 18th Edition of the IET WIring Regulations (forthcoming BS 7671:2018) is imminent, and BSI and the IET have publicised some of the key changes, which can be viewed on the IET web-site. When Amendment No. 3 to BS 7671:2008 was published in 2015, we reported on changes […]
Draft for Public Comment (DPC) for IET Code of Practice for Electric Vehicle Charging Installations, 3rd Edition
The 3rd Edition of the IET Code of practice for electric vehicle charging installations is due to be published later in 2018. A draft for public comment is now available from the IET web-site: https://www.theiet.org/resources/standards/dpc-ev-3rd-ed.cfm The consultation period will end on 28 February 2018, and all comments must be submitted to the IET by this […]
Principal speaking at Solar & Storage Live 4 October 2017
Our Principal, Graham Kenyon, will be speaking on 4 October at Solar and Storage Live, NEC Birmingham, 12:30-14:00. You will hear about the recently-published IET Code of Practice for Electrical Energy Storage Systems. Looking forward to meeting you there. G Kenyon Technology Ltd is not responsible for the content of other web-sites linked from this […]
Now Available from the IET – Code of Practice for Electrical Energy Storage Systems
The IET’s latest Code of Practice, the Code of Practice Electrical Energy Storage Systems, is now available. Find out more.. Co-authored by Martin Cotterell of Tesla, and our Principal, Graham Kenyon, it is set to be an invaluable resource for those involved in the planning, procurement, design, installation, commissioning and maintenance of electrical energy storage […]
IET Code of practice for Electrical Energy Storage Systems: the thought leaders behind the new publication
The IET publishes Code of Practice Electrical Energy Storage Systems in August 2017. It is set to be an invaluable resource for those involved in the planning, procurement, design, installation, commissioning and maintenance of electrical energy storage systems. Hear from members of the IET’s technical committee, including our Managing Director and Principal, Graham Kenyon, about […]
18th Edition DPC out now
The Draft for Public Comment of the 18th Edition of the IET Wiring Regulations (BS 7671), is now available. Public comments can be submitted via the BSI web-site. Have your say … see how here: http://electrical.theiet.org/wiring-regulations/dpc/index.cfm Note: G Kenyon Technology Ltd is not responsible for the content of other web-sites linked from this page. […]
-
Popular electrical installation industry articles are back in the IET Wiring Matters 2026 Annual
The IET Wiring Matters articles that generated the most interest in 2025 have been compiled into the recently published IET Wiring Matters 2026 Annual. Continue…
-
Article and fact-file on cross-pavement EV charging installations
Craig O'Neill, Senior Engineer in the Technical Regulations Team at the IET, and our Managing Director, Graham Kenyon, have written an article Electric vehicle charging…
-
The future’s bright!
The future's bright? Well, hopefully ... but, in the UK electrical installation sector, the future is now certainly ORANGE ... at least for the next…
-
Graham to speak at the ESF Wired FΩr Tomorrow event on 28 April 2026
Our Principal, Graham Kenyon, will be speaking on 28 April 2026 at the Electrical Safety First ‘Wired FΩr Tomorrow’ event diving deep into the electrical…